| Jenis bayaran: | T/T,Paypal |
| Incoterm: | FOB,CFR,CIF,EXW,DDU |
| Pesanan minimum: | 1 Kilogram |
| Pengangkutan: | Ocean,Land,Air,Express |
| Port: | Shenzhen,Guangzhou,Hongkong |
Model No.: TECAMID 66 natural PA 66 UNFILLED
Jenama: Tecamid
| Unit Jualan | : | Kilogram |
| Jenis Pakej | : | Pakej eksport |
The file is encrypted. Please fill in the following information to continue accessing it
Polyamide 66 mempunyai ketegaran, kekerasan, rintangan lelasan dan kestabilan dimensi terma. Di samping itu, nilon 66 mempunyai rintangan haus yang luar biasa dan sifat geseran yang rendah. Ia juga mempunyai suhu, bahan kimia, dan impak yang sangat baik. Pengguna harus menyedari kecenderungan PA 66 untuk menyerap kelembapan yang boleh menjejaskan kestabilan dimensi. Malah, PA 66 akan cenderung menyerap lebih banyak kelembapan pada ketepuan daripada jenis Cast PA 6. Ia telah berjaya digunakan dalam pelbagai aplikasi dari industri elektronik, marin, dan automotif, untuk forrestri, pembinaan dan perlombongan.
Fakta
Penamaan kimia
PA 66 (Polyamide 66)
Warna
gading
Ketumpatan
1.15 g/cm3
CIRI-CIRI UTAMA
Slaid yang baik dan pakai sifat
penebat elektrik
Hartanah haus yang baik
Bagus dan boleh dikimpal
kekuatan tinggi
tahan terhadap banyak minyak, gris dan bahan api
ketangguhan yang tinggi
Industri sasaran
Kejuruteraan mekanikal
Teknologi makanan
elektronik
Teknologi Pesawat dan Aeroangkasa
industri automotif
TECAMID 66 Lembaran Data Teknikal PA 66 Natural PA
| Mechanical Properties | ||||
| VALUE | UNIT | PARAMETER | NORM | |
| Modulus of elasticity | 3500 | MPa | 1mm/min | DIN EN ISO 527-2 |
| (tensile test) | ||||
| Tensile strength | 85 | MPa | 50mm/min | DIN EN ISO 527-2 |
| Tensile strength at yield | 84 | MPa | 50mm/min | DIN EN ISO 527-2 |
| Elongation at yield (tensile test) | 7 | % | 50mm/min | DIN EN ISO 527-2 |
| Elongation at break (tensile test) | 70 | % | 50mm/min | DIN EN ISO 527-2 |
| Flexural strength | 110 | MPa | 2mm/min, 10 N | DIN EN ISO 178 |
| Modulus of elasticity | 3100 | MPa | 2mm/min, 10 N | DIN EN ISO 178 |
| (flexural test) | ||||
| Compression modulus | 2700 | MPa | 5mm/min, 10 N | EN ISO 604 |
| Impact strength (Charpy) | n.b. | kJ/m2 | max. 7,5J | DIN EN ISO 179-1eU |
| Notched impact strength (Charpy) | 5 | kJ/m2 | max. 7,5J | DIN EN ISO 179-1eA |
| Ball indentation hardness | 175 | MPa | ISO 2039-1 | |
| Compression strength | 20/35/81 | MPa | 1% / 2% / 5% | EN ISO 604 |
| Thermal Prpperties | ||||
| ROPERTIES | VALUE | UNIT | PARAMETER | NORM |
| Glass transition temperature | 47 | C | DIN EN ISO 11357 | |
| Melting temperature | 258 | C | DIN EN ISO 11357 | |
| Thermal conductivity | 0.36 | W/(k*m) | ISO 22007-4:2008 | |
| Specific heat | 1.5 | J/(g*K) | ISO 22007-4:2008 | |
| Service temperature | 170 | C | short term | NN |
| Service temperature | 100 | C | long term | NN |
| Thermal expansion (CLTE) | 11 | 10-5*1/K | 23-60℃, long. | DIN EN ISO 11359-1;2 |
| Thermal expansion (CLTE) | 12 | 10-5*1/K | 23-100℃, long. | DIN EN ISO 11359-1;2 |
| Electrical Properties | ||||
| ROPERTIES | VALUE | UNIT | PARAMETER | NORM |
| surface resistivity | 1014 | Ω | - | |
| volume resistivity | 1014 | Ω | ||
| Other Properties | ||||
| VALUE | UNIT | PARAMETER | NORM | |
| Resistance to hot water/ bases | (+) | - | - | |
| Flammability (UL94) | HB | - | corresponding to | DIN IEC 60695-11-10; |
| Resistance to weathering | - | - | - | |
| Water absorption | 0.2 - 0.4 | % | 24h / 96h (23°C) | DIN EN ISO 62 |
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Fill in more information so that we can get in touch with you faster
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Contact Now